AirFiber 4.10 is out

Important notes
  • Please update far end of a link before the near end
  • Please refresh browser cache when logging into a v4.1.0 unit for the first time
  • UNMS cannot upgrade airFiber firmware loaded with pre-beta8 firmware (i.e. -beta7, etc.)
  • If you are upgrading from pre-v4.0 software, your password (after upgrade) will be the first 8 characters of your pre v4.0 password. If you chose to downgrade, please ensure that your password is no longer than 8 characters or you will be locked out of your unit.
Features
  • Added additional modulation rates (3x, 5x, 7x, 9x, 11x)
  • Improved throughput capacity (improved modulation performance)
  • Added support for UNMS
  • Added telemetry reporting (optional)
  • Changes to support Apple SSL certificate location rules
  • Updated default https certificates validity for 18 years
  • Added Paraguay and Swaziland country codes
  • Telnet Server port number now displayed on Services tab when using default number (23)
  • Added alert box when Receive Target Power is enabled
  • Build number now shown in system tab
  • Firmware version now displayed with product ID (i.e AF11 vs AF09)
  • Assorted web changes to colors, initial login screens, updated EULA
Improvements
  • Manual browser refresh not required when upgrading FROM 4.1.0
  • Updated SNMP MIB
Bugfixes
  • Detect and recover from OTA management traffic lockup
  • Detect and recover from user traffic lockup
  • Fixed issue where capacity graph showed 2x capacity when there was no GPS signal at the timing master
  • Fixed issue where GPS process would use 100% of the CPU
  • Fixed issue where RF link would repeatedly reset if Ethernet port was disabled
  • Addressed issue with moving (jittery) labels around signal strength graph
  • Corrected conducted power reading when using Receive Target Power
  • Fixed issue with Carrier Drop Operation where unit would not come back if Block Data After Pulse was enabled
  • Fixed issue where disabling Management VLAN after upgrade from pre v4.0 could corrupt networking configuration
  • Fixed SNMP reporting of frequency (SNMP now reports frequencies in MHz)
  • Fixed Static IP gateway address usage (was ignored if configured with v4.0.x)
  • Fixed GUI issue where deleting link name and pasting in a replacement would not work
Known issues
  • If you are upgrading from pre-v4.0 software, your password (after upgrade) will be the first 8 characters of your pre v4.0 password. If you chose to downgrade, please ensure that your password is no longer than 8 characters or you will be locked out of your unit.

Official Page and Download links here

j2networks family of sites
https://j2sw.com
https://startawisp.info
https://indycolo.net