Mikrotik RouterOS 6.46 is out

Mikrotik RouterOS 6.46 is out

What’s new in 6.46 (2019-Dec-02 11:16):

Lots of fixes in this.  Many LTE, WInbox, SNMP fixes.  CRS fixes as well.
Notable Changes (not all but ones I think are worth pulling out). Full changelog can be foudn at https://www.mikrotik.com/download

*) backup – fixed automatic backup file generation when configuration reset by button;
*) backup – store automatically created backup file in “flash” directory;
*) bonding – correctly remove HW offloaded bonding with ARP monitoring;
*) bonding – properly handle MAC addresses when bonding WLAN interfaces;
*) bridge – disable/enable bridge port when setting bpdu-guard;
*) bridge – do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged;
*) bridge – do not add dynamically VLAN entry when changing “pvid” property for non-vlan aware bridge;
*) bridge – include whole VLAN-id in DHCP Option 82 message;
*) ccr – improved general system stability;
*) crs1xx/2xx – allow to set trunk port as mirroring target;
*) crs3xx – correctly handle L2MTU change;
*) crs3xx – do not send pause frames when ethernet “tx-flow-control” is disabled on CRS326/CRS328/CRS305 devices;
*) crs3xx – improved interface initialization;
*) crs3xx – improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
*) crs3xx – improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
*) defconf – require “policy” permission to print default configuration;
*) dhcpv6-client – fixed timeout when doing rebind;
*) dhcpv6-client – properly update bind time when unused prefix received from the server;
*) dhcpv6-client – properly update IPv6 address on rebind;
*) dhcpv6-server – fixed logged error message when using “address-pool=static-only”;
*) dhcpv6-server – ignore prefix-hint from client’s DHCPDISCOVER if static prefix received from RADIUS;
*) dhcpv6-server – include “User-Name” parameter in accounting requests;
*) dhcpv6-server – made “calling-station-id” contain MAC address if DUID contains it;
*) dot1x – added “reject-vlan-id” server parameter (CLI only);
*) dot1x – added support for dynamic switch rules from RADIUS;
*) dot1x – added support for “mac-auth” authentication type (CLI only);
*) ethernet – automatically detect interface when using IP address for power-cycle-ping;
*) ethernet – do not enable interface after reboot that is already disabled;
*) ipsec – fixed DNS resolving when domain has only AAAA entries;
*) ipsec – fixed policy “sa-src-address” detection from “local-address” (introduced in v6.45);
*) ipv6 – changed “advertise-dns” default value to “yes”;
*) route – fixed area range summary route installation in VRF;
*) sniffer – allow filtering by packet size;
*) usb – general USB modem stability improvements;

j2networks family of sites
https://j2sw.com
https://startawisp.info
https://indycolo.net
#packetsdownrange #routethelight