Hurricane Electric Route Filtering Algorithm

The following is from http://routing.he.net/algorithm.html . This outlines the criteria HE.NET uses for filtering routes from peers and customers.

This is the route filtering algorithm for customers and peers that have explicit filtering:

1. Attempt to find an as-set to use for this network.
1.1 Inspect the aut-num for this ASN to see if we can extract from their IRR policy for what they would announce to Hurricane by finding export or mp-export to AS6939, ANY, or AS-ANY.
1.2 Also see if they set what looks like a valid IRR as-set name in peeringdb.

2. Collect the received routes for all BGP sessions with this ASN. This details both accepted and filtered routes.

3. For each route, perform the following rejection tests:
3.1 Reject default routes 0.0.0.0/0 and ::/0.
3.2 Reject paths using BGP AS_SET notation (i.e. {1} or {1 2}, etc). See draft-ietf-idr-deprecate-as-set-confed-set.
3.3 Reject prefix lengths less than minimum and greater than maximum. For IPv4 this is 8 and 24. For IPv6 this is 16 and 48.
3.4 Reject bogons (RFC1918, documentation prefix, etc).
3.5 Reject exchange prefixes for all exchanges Hurricane Electric is connected to.
3.6 Reject routes that have RPKI status INVALID_ASN or INVALID_LENGTH based on the origin AS and prefix.

4. For each route, perform the following acceptance tests:
4.1 If the origin is the neighbor AS, accept routes that have RPKI status VALID based on the origin AS and prefix.
4.2 If the prefix is an announced downstream route that is a subnet of an accepted originated prefix that was accepted due to either RPKI or an RIR handle match, accept the prefix.
4.3 If RIR handles match for the prefix and the peer AS, accept the prefix.
4.4 If this prefix exactly matches a prefix allowed by the IRR policy of this peer, accept the prefix.
4.5 If the first AS in the path matches the peer and path is two hops long and the origin AS is in the expanded as-set for the peer AS and either the RPKI status is VALID or there is an RIR handle match for the origin AS and the prefix, accept the prefix.

5. Reject all prefixes not explicitly accepted

Noction: BGP in Large Networks

Are you running a large scale BGP network? Need some tips and help on what to optimize and what your next steps to optimize your setup?

Using iBGP with loopback addresses
Making sure all routers know next hop and loopback addresses
Whether to use route reflectors rather than an iBGP full mesh
Where to originate prefixes
Where and how to filter announcements

Using BGP in large scale networks and how to get the most out of it. Paper by Noction