AirFiber 4.10 is out

• Please update far end of a link before the near end
• Please refresh browser cache when logging into a v4.1.0 unit for the first time
• UNMS cannot upgrade airFiber firmware loaded with pre-beta8 firmware (i.e. -beta7, etc.)
• If you are upgrading from pre-v4.0 software, your password (after upgrade) will be the first 8 characters of your pre v4.0 password. If you chose to downgrade, please ensure that your password is no longer than 8 characters or you will be locked out of your unit.

• Added additional modulation rates (3x, 5x, 7x, 9x, 11x)
• Improved throughput capacity (improved modulation performance)
• Added support for UNMS
• Added telemetry reporting (optional)
• Changes to support Apple SSL certificate location rules
• Updated default https certificates validity for 18 years
• Added Paraguay and Swaziland country codes
• Telnet Server port number now displayed on Services tab when using default number (23)
• Added alert box when Receive Target Power is enabled
• Build number now shown in system tab
• Firmware version now displayed with product ID (i.e AF11 vs AF09)
• Assorted web changes to colors, initial login screens, updated EULA

• Manual browser refresh not required when upgrading FROM 4.1.0
• Updated SNMP MIB

• Detect and recover from OTA management traffic lockup
• Detect and recover from user traffic lockup
• Fixed issue where capacity graph showed 2x capacity when there was no GPS signal at the timing master
• Fixed issue where GPS process would use 100% of the CPU
• Fixed issue where RF link would repeatedly reset if Ethernet port was disabled
• Addressed issue with moving (jittery) labels around signal strength graph
• Corrected conducted power reading when using Receive Target Power
• Fixed issue with Carrier Drop Operation where unit would not come back if Block Data After Pulse was enabled
• Fixed issue where disabling Management VLAN after upgrade from pre v4.0 could corrupt networking configuration
• Fixed SNMP reporting of frequency (SNMP now reports frequencies in MHz)
• Fixed Static IP gateway address usage (was ignored if configured with v4.0.x)
• Fixed GUI issue where deleting link name and pasting in a replacement would not work

• If you are upgrading from pre-v4.0 software, your password (after upgrade) will be the first 8 characters of your pre v4.0 password. If you chose to downgrade, please ensure that your password is no longer than 8 characters or you will be locked out of your unit.

Official Page and Download links here