MacOS Catalina RIP 32-bit programs

As many of you, Mac users may know the new Mac OS version, codenamed “Catalina” has dropped support for 32-bit programs.  Some of the programs I use on a regular basis are listed below.  If they have an update I will note it, and if they do not I list an alternative.

Zterm – Terminal Emulator.  I now use Serial https://www.decisivetactics.com/products/serial/.
TFTP – https://www.decisivetactics.com/products/trivial/
Textwrangler – BBedit https://www.barebones.com/products/bbedit/index.html
Dragthing – Icollections https://naarakstudio.com/icollections/

Ubiquiti releases EdgeMAX EdgeSwitch software 1.8.2

From their announcement

A new software release for EdgeSwitch (all current models) is available here:

EdgeSwitch 1G switch models: ES-48-750W, ES-48-500W, ES-24-500W, ES-24-250W, ES-48-Lite, ES-24-Lite, ES-16-150W, ES-12F,ES-8-150W, EP-S16.

Normal version:
https://dl.ubnt.com/firmwares/edgemax/EdgeSwitch/v1.8.2/ES-eswh.v1.8.2.5192445.stk
(SHA1: b1f66416276ef7de9abd5d2c50fa79b75d1bfe49) (GPL archive)

LITE version:
https://dl.ubnt.com/firmwares/edgemax/EdgeSwitch/v1.8.2/ES-eswh.v1.8.2-lite.5192445.stk

(SHA1: 47c11f3ce06d77e450a480877e06d2e72a6c6192)

Mib files:

https://dl.ubnt.com/firmwares/edgemax/EdgeSwitch/v1.8.2/ES-eswh.v1.8.2.5192445-mibs.tar.gz

(SHA1: 85b3acb15923b94f25bc965a98f72d24a4dac1f1)

EdgeSwitch 10G switch model: ES-16-XG
Normal version:

https://dl.ubnt.com/firmwares/edgemax/EdgeSwitch/v1.8.2/ES-esgh.v1.8.2.5192445.stk
(SHA1: 4aa6412e4736e9a1314700af3c7d05c61500d20b) (GPL archive)

LITE version:

https://dl.ubnt.com/firmwares/edgemax/EdgeSwitch/v1.8.2/ES-esgh.v1.8.2-lite.5192445.stk
(SHA1: 0e627ec330e3ec38feca97a2564be701f40ae246)

Mib files:

https://dl.ubnt.com/firmwares/edgemax/EdgeSwitch/v1.8.2/ES-esgh.v1.8.2.5192445-mibs.tar.gz

(SHA1: cb726e10689de0004d08ccc6d26beeec5a9f3f60)

Bug fixes and enhancements

  • [VLAN] reduce maximum VLAN number from 4093 to 256 (Only in Lite version).
  • [SECURITY] fix some issues in the Legacy UI.
  • [SECURITY] fix injection issue in CLI command.
  • [SYSTEM][ESWH] improve system stability.
  • [SYSTEM][ESWH] improve compatibility with SFP+ module (UF-SM-10G-S).
  • [SYSTEM] fix bugs with some specific cases in config checker.
  • [SYSTEM] fix time range multi entries issue.
  • [SYSTEM] add CLI command ‘show mbuf detail’.
  • [SYSTEM] add check for memory tuning.
  • [SYSTEM] reduce the memory usage in firmware upgrade.
  • [DHCP_RELAY] check invalid VLAN value.
  • [DNS] synchronize the static ip-host in system.
  • [CLI][Legacy UI] update copyright for 2019.

ePMP tip of the day

http://community.cambiumnetworks.com/t5/ePMP-FAQ/How-does-the-GPS-Sync-Radio-utilize-the-Active-and-Inactive/m-p/82855#M143

ePMP GPS Sync Radio devices that have an onboard GPS contain two banks of flash memory which each contain a version of software.

The version of software last installed onto the device flash memory (using software upgrade procedures) is configured in the Active Bank. This software will be used by the device when the device is rebooted.